High Visibility Black / Yellow Anti-Slip Stair Treads 150mm x 610mm

Product Code 06-0245

From £3.54 £2.95

Only %1 left

Buy 20 for £3.30 £2.75 each and save 7%
Buy 50 for £3.06 £2.55 each and save 14%

In stock

Next Day Delivery

» View Our Full Range of...Anti-Slip Tapes & Treads

UK Mainland Delivery just £8.95*

*some postcode & product exclusions apply, delivery charges are applied during checkout

Hi-viz Anti-slip Floor Treads

Highlight potential hazards and ensure maximum grip on stairs, steps, ramps & walkways

Black / Yellow chevron design increases visual awareness of steps and changes in floor level
A medium-profile silicon carbide grit finish provides a durable high-traction surface for steps, ramps, walkways and entrances
Can be applied to a wide range of surfaces and situations both indoors and out
Powerful adhesive system is resistant to most chemicals and fluids for excellent longevity
We recommend the use of floor primer and edge sealer, particularly on porous surfaces to improve adhesion and extend product life
See below for our full range of self adhesive treads including our foil backed highly conformable treads, ideal for improving grip on patterned & chequer plate stairs

Details

Installation Guidance

Anti-Slip Tapes and Treads should be applied to clean, dry and relatively smooth surfaces. Dusty, soiled and porous surfaces should be thoroughly cleaned and prepared with anti-slip floor primer to ensure the best adhesion and ultimately product longevity. Edge sealer is also recommended for best results to prevent water / chemical ingress.

Application is best carried out when the ambient temperature is above 10^oC. We recommend the use of a seam roller to apply even pressure to achieve the required 'tack' / initial adhesion. Products can be walked on immediately. Adhesive bond reaches full strength after 24 hours.

Our Tapes & Treads have good levels of conformability and can be applied to patterned / diamond tread surfaces and stair plates. A rubber mallet should be used to help form the tape to the surface.

Installation notes are for general advice only. Please contact us for specific advice about your intended application. Check out our SafetyBuyer blog for more installation tips.

More Information

Delivery	Next Day Delivery
Size	150mm x 610mm (Tread)
Grade	Talon
Brand	Talon

FAQs (3)

Customer Questions

Would these be suitable for & long-lasting on steps made from new wooden sleepers?

It's probably not an ideal solution for use on sleepers, even 'new' sleepers can be rough cut and they will absorb water and eventually damage the adhesive. As a short term solution they would be OK. For the best results anti-slip tapes and treads should be applied to smooth, dry & clean surfaces, and the use of primer on porous surfaces is recommended.

How thick are these & CAN YOU SCREW THEM DOWN

These are adhesive backed, not intended for screw fixing, But we have GRP strips, treads, nosings and sheets should you want to screw fix a more durable solution.

Hi can these be used on concrete stairs?

Yes, just make sure the concete is dry and clean. If there's any flaky previous coats of paint, this will need scraping back. And if the surface is porous, the use of primer would be best. Edge sealer will help prevent the ingress of water and increase the longevity to your installation.

Did you find what you were looking for?

Your question:

Your name:

get notification on email when the answer is ready

Your e-mail: